Yes, we ship all over the world; however, free shipping is only applicable for domestic orders. International shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.

We fill all orders within 24 hours of purchase. Orders processed here will take 2-7 business days to arrive. Delivery details will be provided in your confirmation email. Overseas deliveries can take anywhere from 7-16 days.

We use all major carriers, and local courier partners. You’ll be asked to select a delivery method during checkout.
-Priority Mail Delivery: 2-3 Days
-USPS Ground Delivery: 5-7 Days

The film is made using a calendared process similar to vinyl flooring. This film will remain for as long as you want and totally removable without sticky residue. We also offer a 5 Year Warranty!

✔Tear Resistant: Up to 330pounds per yard. ✔Stain Resistant: Grape juice, ink and wine. ✔Dimensionally Stable: When exposed to hot and cold. ✔Heat Resistant: Up to 240 F. ✔Wear Resistant, ✔Fade Resistant, ✔Water Resistant.

Our film is a heavy gauge PVC film. It is twice as thick as most brands. The film is thick enough to cover most scratches and texture. If you have grout lines or deep grooves we suggest filling in with acrylic caulk and smooth it out first.

Our product is made scratch resistant, but you will want to protect it as you would with any other countertop. We always recommend a cutting board.

YES! Our film is made with a water based adhesive. This allows fast easy and removal without sticky residue. We recommend using a blow dryer to heat up one corner of the film, take a hold of it and pull it all up at  once. Use any household cleaner to spray and clean your surface.

Absolutely. Our products are made with non-toxic materials that are 100% safe. We always keep our customer's safety and wellness as our #1 priority.

Yes, the material is waterproof, if you wish you may  seal the edges/corners with silicon clear caulk.

The material can easily be cut with scissors or a craft knife.  A tape measure or ruler for measuring.  Use a plastic scraper or more specifically one of our application squeegees for applying.  Lastly a spray bottle with warm water with a few drops of washing up liquid mixed in and a hairdryer for surfaces where edges need to be wrapped.

Tools Needed: A pencil | A ruler or tape measure | Ammonia free cleaner | Pair of scissors, razor, or a sharp knife | A hair dryer or heat gun is great for corners! 

Apply heat to the top and bottom of the film using a blow dryer or heat gun to make the film soft and pliable. We suggest using the heat method on the total application to make the application easier as well it will adhere and the adhesive will cure quicker.

The vinyl has  bubble resistant backing.  What does that mean? The backing has diamond shaped channels which allow air and water to be squeegeed out as you apply the vinyl. These channels allow the water and air to escape whilst you squeegee. You will be able to hear the air escape and you will be able to see the water come out as you squeegee. When you apply the vinyl the water does not dry right away.  It takes about 24 hours or longer for the water to dry under the vinyl after applying, then the adhesive will cure and set up. If you get a couple of air pockets 24 hours later don’t worry!  Use the squeegee again, or prick the surface with a needle and press the air out through the hole.

Of course! To do so, simply heat up the vinyl while you are working with it with a hair dryer on low pull the film into the form desired and squeegee down.  If the sheet is heated, the corners and edges can be pulled into place without any problems.

Surfaces must be clean, free of dust and wax.  Smooth surfaces such as glass, gloss plastics, painted wood and laminated furniture will offer the greatest adhesion.  Porous surfaces such as unpainted MDF or plywood will require a primer to be applied. (Kilz works nicely) Film will cover textured appliances nicely and don’t require any special treatment, just clean and apply.

The easiest way to apply vinyl is to position in place, then peel back a small section of the vinyl and fold the backing paper under.  You can now stick the leading edge down.  Now, whilst pulling the backing paper off squeegee the vinyl down with smooth actions.  You can also use the spray bottle mentioned above and moisten the surface prior to sticking the material down, you can then squeegee the bubbles and excess liquid out, allow to dry.  DO NOT use the spray on porous surfaces. (untreated/painted sheet rock)